Detailed explanation of the operation method of the wood grabber
Time:
Jul 30,2024
1. Start the wood grabber 1.Ensure that the site where the wood grabber is located is stable and free of obstacles.
1. Start the wood grabber
1.Ensure that the site where the wood grabber is located is stable and free of obstacles.
2.Check whether the voltage and current of the equipment power supply and battery are normal.
3.Check the filling level of mechanical hydraulic systems, bearings, chains, pumps, etc. to ensure sufficient lubrication and cleanliness.
4.Start the wood grabber in accordance with the manufacturer's instructions.
2. Adjust the wood grabber
1.Adjust the control mechanism so that the wood grabber reaches the working state.
2.The flexibility of the control lever is adjusted to ensure the correct and stable operation of the wood grabber in a high-intensity environment.
3.Adjust the grapple plate so that it can better clamp the object when grabbing the wood.
4.Carry out necessary maintenance, including cleaning, lubrication and replacement of worn parts.
Three, precautions
1.You need to wear safety equipment before operation, protective clothing, gloves, goggles, etc. are readily available.
2.When operating the wood grabber, a certain distance should be maintained so as not to be injured by the catapult of the grabbed wood.
3.When operating the wood grabber, attention should be paid to safety protection, to ensure that there are no obstacles in the work site, and to prevent accidents.
4.After the operation is over, turn off the equipment in time for cleaning and maintenance.
E-mail：